The impact driver is one of the most famous tools in the field of power tools. Developed for the comfort and ease of users, an impact driver is a gadget that is aimed to facilitate a person in every aspect. That is the reason, it does not put the user to complexity.
With its modern structure and design, any ordinary layman can use it without any expertise. So, you would not find any person who says “No” to use this great tool due to such an easy to operate structure.
- Are you a new user and you do not know how to use the impact driver?
- Are you worried about its usage?
Since, it is the technical era and by employing the latest technology, these powered tools have made human life quite easier. But in order to use these tools, you must be well versed with a step by step procedure. How you can use an impact driver, how it can help you in various ways, let’s explore with this thorough procedure.
Steps to Use An Impact Driver:
Insert the Battery: In order to operate an impact driver, first you have to ensure its battery is inserted or not. First of all, check the impact driver; it must be switched off at this step. Then, make sure that battery is inserted accurately. You can do it easily just by sliding the battery into the handle of the tool, and when you hear the sound of ‘click,’ it is finally done.
Select Correct Bit: Make sure that you select the correct bit. It is essential to take care of this step. The shank end of the tool must be cleaned as well.
Utilize a Bit Holder: Make use of a bit holder for the shorter bits. The shorter bit has the magnetic endpoint so that it can hold the hexagonal shank and bits in a well-mannered way.
Insert the Bit: Put the bit into the chuck so that it may move. Hold it until and unless you will realize that it engages with the backside of the chuck.
Set Rotation: Now, you need to set the switch for a proper rotation. Adjust the switch in forward and reverse mode, and then place it in the forward position.
Set Speed: At this stage, you need to set the speed at which you want to run your impact driver. If the impact driver has a range of gears and speed diameters from which you have to choose, then go for the gear that suits you best at the time of work. Neither go for too low nor too high speed.
Turn on the Light: Never forget to turn the lights on if you are working in an area that is not bright enough. It will keep you safe from any accident or unexpected injuries.
Turn the Tool On: It is the time to turn on the switch of your Impact Driver and be ready to start your job.
Press Trigger: After turning on the tool, you need to press the trigger by placing the impact driver on the area where you want to dig a hole. Start pressing the trigger gradually and do not run it on the highest speed at once. You can decrease or increase the speed whenever it is needed. The changes in the speed depend on the nature of the task and situation.
Adjust Gears: As per your requirement you may have more or less speed by adjusting the gears accordingly.
Keep the Tool at a Side: While using the tool you must take care of yourself and surroundings as well. When you are done with the task, turn the tool off and put it on a side. Make sure you place the tool on a plane surface. As it will allow the parts to get cooled down.
Detach Bits: This is the last step where you have to detach bits. For this purpose, you have to hold the chuck with a hand and pull it on the front side. Finally, pull the bit outward carefully.
Hopefully, this complete guide will help you to use the impact driver in a successful way. And will enable you to fulfill your tasks in a proficient manner using this amazing tool.